Home
Technology
Applications
Sentry Database
Live Cameras
M22M
Camera Series
M12D-DualNight
Camera Series
D12D-DualDome
Camera Series
Special Editions
MxControlCenter
Accessories
Power
Adapters
Power
Adapter Set
Power
Supply
Wall/Ceiling
Mounts
Weather
Protection
CS
Mount Adapters
Lens
Options
Product Benefits
Airports, Rail & Bus Stations
Casinos, Museums, Restaurants
Chemical Manufacturing
Cities, Municipalities, Events
Construction Sites
Correctional Facilities
Distribution Facilities
Educational Facilities
Financial Institutions
Food Processing
Government Facilities
Law Enforcement
Military, Homeland Security
Mining, Lumber, Paper Mills
Oil and Gas Industry
Parking lots, Self Storage
Property Management
HOA's, Gated Communities
Low Income Housing
Condos, Apartments
Shopping Centers
Resorts, High end homes
Power Plants, Pipelines
Retail and Wholesale
Waste Water Facilities
|
|
Accessories
| |
- Remote power
supply for operating voltage in the
network or ISDN cable to the camera;
Pin8 = (+), Pin7 = (-)
- Cross function
for direct connection to the PC
- 3 RJ45 plug (power
supply, camera, network)
Article number:
MX-NPA-3-RJ
|
| |
- Power supply
with 4 integrated network power adapters
Article number:
MX-NPR-4
|
| |
- Remote power
supply for operating voltage in the
network or ISDN cable to the camera;
Pin8 = (+), Pin7 = (-); surge protection
- After the switch
for up to 8 cameras with 2 RJ45 plugs
each, data signals looped in
- Operation monitoring
(green LED = camera connected) and short-circuit
monitoring (red LED = cable short-circuit)
- 19" design
with 2 HE, stainless steel front plate
Article number:
MX-NPR-8
|
| |
- As for the NETPOWER
network power rack 8 cameras, but for
up to 20 cameras
Article number:
MX-NPR-20
|
 |
- Suited for all camera models
- Includes the network power adapter with
the RJ45 plug and the 30V universal power
supply
Article numbers: MX-NPA-SET-DE (Europe)
MX-NPA-SET-GB (UK) MX-NPA-SET-US (US version)
MX-NPA-SET-JP (Japan) MX-NPA-SET-AUS (Australia)
|
|
- For the direct connection of the camera
or via the network power adapter
- The power supply can be connected to either
the ISDN or the Ethernet interface of the
camera. The network power adapter is required
for the remote power supply to the camera
via the network cable (Power-Over-Ethernet).
- Input voltage: 100-250 V~
- Output voltage: 30 V=/240 mA
Article numbers:
MX-SNT-E01-30-RJ
MX-SNT-U01-30-RJ
MX-SNT-GB01-30-RJ
MX-SNT-J01-30-RJ
MX-SNT-AUS01-30-RJ
|
| |
- Concealed
cable guide in joints
- Swivels
90° to the right and left
- Tilts
70° down
- Covers
an RJ45 flush-mounted power
plug
- Compatible
with all M10 cameras
(incl.
mounting material in stainless
steel)
Article
number:
MX-WH-SecureFlex
|
| |
- Wall
mounting bracket, which transforms
the already weatherproof D10D
cameras into IP65-certified
devices approved for use in
outdoor areas
Article
number:
MX-WH-Dome
|
|
| |
- Made
of 3mm thick stainless steel
painted white
- Flange
to a SecureFlex wall mounting
bracket
Article
number:
MX-MH-SecureFlex-ESWS
|
| |
- Made
of 3mm thick stainless steel
painted white
- Flange
to a D10D outdoor wall mounting
bracket
Note:
The D10 wall mounting bracket
(article number MX-WH-Dome)
has to be ordered separately.
Article
number:
MX-MH-Dome-ESWS
|
| |
- Spare
part with clamp screw, screw
nut, spring washer
- What’s
included with standard delivery
(M10 outdoor models
only)
Article
number:
MX-WH
|
| |
- Can
be used as table stand, wall
mounting, mast mounting or
attached to a tripod; camera
side tilt can be adjusted
at the slots
- Angle
with 130 x 130 x 100 mm
- Incl.
standard ball-joint wall mounting
bracket, screws, plugs
- Special
accessory (M10 outdoor
models only)
Article
number:
MX-NPA-Set
|
| |
- To
adjust the camera tilt, the
ball-joint wall mounting can
also be turned to the right
or left after it has been
mounted.
- Special
accessory (M10 outdoor
models only)
Article
number:
MX-NPA-Set
|
| |
- Bracket
for the ceiling mounting of
indoor cameras
- What’s
included with standard delivery
(M10 indoor models only)
Article
number:
MX-WM-Set A
|
|
| |
Article numbers:
MX-M10-DevKit-CS-BW
Related products:
M10-DevKit-Board
|
| |
- With 3 plugs
for cables Ø 4.5-6.5 mm to cover
the bottom camera collar
Also covers the RS232 plug
Dimensions approx. 90 x 90 x 35 mm, 3
cable ties
What’s included with standard delivery
(M10 outdoor models only)
Article
number:
MX-WS01
|
|
|
|
|
|
Customers can find any new releases of the MOBOTIX software as free downloads
on the Internet.
|
|
|
